Are you in search for load data for 7mm-08? Look no further. This guide will provide you with everything you need to know about this popular cartridge.
What is 7mm-08?
7mm-08 is a cartridge that was introduced in the 1980s. It is based on the .308 Winchester case, but with a neck that is resized to accept a bullet that is 7mm in diameter. This cartridge has gained popularity among hunters and shooters because of its low recoil, flat trajectory, and excellent accuracy.
Choosing the Right Bullet
When selecting a bullet for your 7mm-08, it’s important to consider the type of game you will be hunting. For medium to large game, a bullet that is between 140-160 grains is recommended. For smaller game, a lighter bullet of around 120-130 grains may be more suitable. It’s also important to consider the shape of the bullet, as some shapes may work better than others for your specific firearm.
Choosing the Right Powder
The powder you choose will depend on your specific reloading needs. For the 7mm-08, powders such as IMR 4350, H4350, and Reloader 19 are popular choices. It’s important to always start with the recommended starting load and work your way up, being careful not to exceed the maximum recommended load for your specific firearm.
Priming Your Brass
When it comes to priming your brass, it’s important to use a primer that is appropriate for your specific cartridge. For the 7mm-08, a large rifle primer is recommended. Always follow the manufacturer’s instructions when priming your brass.
Measuring Your Cartridge Overall Length (COL)
Measuring your cartridge overall length (COL) is an important step in reloading. This will ensure that your cartridge will fit and function properly in your firearm. To measure your COL, you will need a caliper. The recommended COL for the 7mm-08 is 2.80 inches.
Setting Your Dies
Setting your dies correctly is crucial for ensuring that your cartridges are loaded safely and accurately. When setting your sizing die, it’s important to make sure it’s adjusted to the correct height. Your seating die should also be set to the correct height to ensure proper bullet seating depth.
Choosing the Right Brass
When selecting brass for your 7mm-08, it’s important to choose a quality brand that is appropriate for your specific reloading needs. Some popular brands include Hornady, Nosler, and Remington. It’s also important to ensure that your brass is the correct length and that it has been properly resized.
Measuring Your Powder Charge
Measuring your powder charge accurately is crucial for ensuring the safety and accuracy of your reloads. A powder measure can be used to measure your charge, or you can use a scale to weigh your charge for added accuracy.
Tips for Safe Reloading
When reloading, it’s important to always put safety first. Follow all recommended load data, and never exceed the maximum recommended load for your specific firearm. Always wear eye and ear protection, and ensure that your reloading area is clean and free of distractions.
Conclusion
Reloading your own ammunition can be a rewarding experience, and with the right load data and equipment, you can create cartridges that are both safe and accurate. Always follow recommended load data and safety guidelines, and never hesitate to seek the advice of a qualified reloading expert if needed.
Related video of Load Data for 7mm-08: A Guide for Shooters
https://youtube.com/watch?v=TmhjnzUMwLA