If you own a Keurig coffee maker, you may have experienced the frustrating issue of water under pressure. This occurs when your Keurig starts to make a lot of noise and no water comes out. There are several reasons that can cause this problem, but the good news is that most of them can be easily fixed. In this article, we will discuss the most common causes of water under pressure in Keurig coffee makers and how to fix them.
What Causes Water Under Pressure in Keurig Coffee Makers?
There are several reasons why your Keurig coffee maker might experience water under pressure. Here are some of the most common ones:
Clogged Needles
The needles that pierce the K-Cup can get clogged with coffee grounds or mineral buildup, which can cause water under pressure. To fix this problem, you can try cleaning the needles with a paper clip or a needle.
Dirty Water Reservoir
If the water reservoir is dirty, it can cause water under pressure. To fix this problem, you should clean the water reservoir regularly with soap and water.
Blocked Water Line
If the water line is blocked, it can cause water under pressure. You can try to fix this problem by descaling your Keurig coffee maker. Descaling is the process of removing mineral buildup from the internal components of your Keurig coffee maker.
Defective Water Pump
If none of the above solutions work, it’s possible that your Keurig’s water pump is defective. A defective water pump can cause water under pressure or no water at all. If this is the case, you should contact Keurig customer service for a replacement pump.
How to Troubleshoot and Fix Water Under Pressure in Keurig Coffee Makers
If you are experiencing water under pressure in your Keurig coffee maker, here are some troubleshooting tips that can help you fix the problem:
Tip #1: Clean the Needles
The first thing you should do when you experience water under pressure is to clean the needles. To do this, turn off your Keurig and unplug it. Then, remove the K-Cup holder and use a paper clip or a needle to clean the needles. Once you have cleaned the needles, reassemble your Keurig and try brewing again.
Tip #2: Clean the Water Reservoir
If cleaning the needles doesn’t solve the problem, the next thing you should do is clean the water reservoir. To do this, remove the reservoir from the Keurig and wash it with soap and water. Make sure to rinse it thoroughly and dry it before reassembling your Keurig.
Tip #3: Descale Your Keurig
If cleaning the needles and the water reservoir doesn’t work, it’s possible that your Keurig has mineral buildup. To fix this problem, you should descale your Keurig coffee maker. To do this, you can use a descaling solution or a mixture of vinegar and water. Follow the instructions provided with the descaling solution or mix one part vinegar with two parts water and run it through your Keurig. Make sure to rinse your Keurig thoroughly before brewing coffee again.
Tip #4: Contact Keurig Customer Service
If none of the above solutions work, it’s possible that your Keurig’s water pump is defective. In this case, you should contact Keurig customer service for a replacement pump.
Conclusion
Water under pressure in Keurig coffee makers can be a frustrating problem, but it can be easily fixed. By following the troubleshooting tips we’ve provided, you can save yourself time and money by fixing the problem yourself. Remember to clean your Keurig regularly to prevent mineral buildup and clogs. If you’re still experiencing water under pressure after trying these solutions, contact Keurig customer service for assistance.