Swiffer Wet Jet is a popular cleaning tool that many people use to keep their floors spotless. However, like any mechanical device, it can experience problems. If you’re dealing with a situation where your Swiffer Wet Jet won’t spray, don’t panic. There are some things you can do to troubleshoot the issue and get your cleaning back on track.
Check the Batteries
The first thing you should do is check the batteries. The Swiffer Wet Jet is battery operated, and if the batteries are dead or low, it won’t spray. Replace the batteries with new ones and see if that solves the problem. If it doesn’t, keep reading.
Check the Nozzle
Another common reason why your Swiffer Wet Jet won’t spray is that the nozzle may be clogged. Remove the cleaning solution container and clean the nozzle with a paper clip or a toothpick. Make sure there is no debris or dirt blocking the nozzle before reassembling the cleaning solution container.
Check the Solution Container
If your Swiffer Wet Jet still won’t spray after checking the batteries and nozzle, the next thing to check is the solution container. Make sure that there is enough solution in the container and that it is properly inserted into the Swiffer Wet Jet. If the solution container is empty or not correctly inserted, the Swiffer Wet Jet won’t spray.
Check the Tubes
If none of the above steps work, the tubes may be the culprit. The tubes are responsible for delivering the cleaning solution from the container to the nozzle. Make sure that the tubes are not kinked or twisted. If they are, straighten them out before replacing the cleaning solution container.
Replace the Pump
If none of the previous steps solve the problem, the issue may be with the pump. The pump is responsible for pressurizing the cleaning solution and forcing it through the tubes to the nozzle. If the pump is broken, the Swiffer Wet Jet won’t spray. To fix this problem, you will need to replace the pump. You can find a replacement pump at your local hardware store or online.
Conclusion
Dealing with a Swiffer Wet Jet that won’t spray can be frustrating, but don’t worry. There are several steps you can take to troubleshoot the issue and get your cleaning back on track. Check the batteries, nozzle, solution container, and tubes. If none of those steps work, replace the pump. With a little bit of patience and troubleshooting, you’ll be back to cleaning your floors with your Swiffer Wet Jet in no time!